1. Ajayi, A. B., Oyeniyi, R. A., (2024). Development of a Mechanical Sand Sieving Machine
with an Automatic Vibrator. International Journal of Innovative Scientific & Engineering
Technologies Research. 12(1): 1 – 8. https://www.seahipublications.org/wpcontent/uploads/2024/01/IJISETR-M-1-2014.pdf
2. Ajayi, A. B., Anike, V. U., Openibo, A. O. (2023) Development of a Direct Current (DC)
Domestic Solar Powered Deep Freezer for Home Usage, J. Mater. Environ. Sci., (Univ. of
Mohammed Premier Oujda, Morocco). 14(10): 1213 – 1225.
https://jmaterenvironsci.com/Document/vol14/vol14_N10/JMES-2023-14105-Ajayi.pdf
3. Ajayi, A. B., Ojogho, E., Adewusi, S. A., Ojolo, S. J., Campos, J. C. C., Siqueira, A. M. de O.
(2023). Parametric Study of Rider’s Comfort in a Vehicle with Semi-active Suspension System
under Transient Road Conditions. The Journal of Engineering and Exact Sciences. (Fed. Univ.
of Viçosa, Brazil), 9(5): 15287–01e. https://doi.org/10.18540/jcecvl9iss5pp15287-01e
4. Ajayi, A. B., Mustapha, H. A., Afolabi, O. S., Folarin, T. E., and Popoola, A. F. (2023)
Development of a laboratory scale steam boiler for polyurethane (foam) waste recycling
machine. Journal of Advance Engineering and Computation, (TDT Univ., Vietnam), 7(2):
133 – 143. http://dx.doi.org/10.55579/jaec.202372.409
5. Ajayi A. B., Sobamowo, M. G., Nnadi, I., Oladosu, S.A. (2023) Modeling of Multi-Layered
Heat Transfer for the Investigation of Thermal Performance of a Refrigerator Powered with
Solar Energy, J. Mater. Environ. Sci., (Univ. of Mohammed Premier Oujda, Morocco),
14(3): 360 – 372. http://www.jmaterenvironsci.com/Document/vol14/vol14_N3/JMES-2023-
14028-Ajayi.pdf
6. Ajayi, A. B., Ojolo, S. J., Ojogho, E., Campos, J. C. C., & Siqueira, A. M. de O. (2023).
Parametric study of rider’s comfort in a vehicle with semi-active suspension system under
Steady State Road Conditions. The Journal of Engineering and Exact Sciences. (Fed. Univ. of
Viçosa, Brazil), 9(5), 15377–01e. https://doi.org/10.18540/jcecvl9iss5pp15377-01e
7. Ajayi, A. B., Adisa, M. B., Openibo, A. O., Anike, V. U. (2023). Development of Solar Baking
Oven with Sensible Heat Storage, ACTA TECHNICA CORVINIENSIS – Bulletin of
Engineering, (International Journal of Engineering. Faculty of Engineering, Univ.
Politehnica Timisoara, Hunedoara, ROMANIA). 16(4); 45 – 49.
https://acta.fih.upt.ro/pdf/2023-4/ACTA-2023-4-07.pdf
8. Ajayi, A. B., Ojogho, E., Ojolo, S. J., Campos, J. C. C., Siqueira, A. M. de O. (2023).
Application of Skyhook Control Strategy to Semi-active Suspension System with Magnetorheological (M.R) Damper for Improving the Performance of Vehicle Suspension System
Traversing Steady State Road Conditions”. Computational Sciences and Engineering. (Univ.
of Guilan, Iran). https://doi.org/10.22124/cse.2023.24291.1054
9. Ajayi, A. B., Koleosho, O. I. (2023). Comparison of Failure Rates of Different Types of Arc
Welding Joints. International Journal of Innovative Scientific & Engineering Technologies
Research. 11(4): 36 – 47. https://www.seahipublications.org/wpcontent/uploads/2023/11/IJISETR-D-4-2023.pdf
10. Sobamowo, M. G., Berrehal, H., Ajayi, A. B., Onanuga, O. K., Fawumi, R. O. (2023). Thermal
performance investigation of porous fins with convection and radiation under the influence of
magnetic field using optimal homotopy asymptotic method. Material Science, Engineering
and Applications, 3(2), 1 – 13. https://doi.org/10.21595/msea.2023.22962
11. Ajayi, A. B., Abegunde, O. E. (2022). “Development of a Renewable Energy Barbecue
Grilling Machine”. ACTA TECHNICA CORVINIENSIS – Bulletin of Engineering, Tome XV,
Fascicule 3. (International Journal of Engineering, 15(3): 91 – 98. Faculty of Engineering,
Univ. Politehnica Timisoara, Hunedoara, ROMANIA).
www.acta.fih.upt.ro/pdf/archive/ACTA-2022-3.pdf
12. Ajayi, A. B., Akanmu, A. A., (2022). Development of a Renewable Energy Powered Avian
Pest Scarer. ACTA TECHNICA CORVINIENSIS – Bulletin of Engineering, Tome XV,
Fascicule 3, (International Journal of Engineering. 15(3): 43 – 48. Faculty of Engineering,
Univ. Politehnica Timisoara, Hunedoara, ROMANIA). https://acta.fih.upt.ro/pdf/2022-
3/ACTA-2022-3-07.pdf
13. Ajayi, A. B., Fagbola, M. T., (2022). “Development of a Semi-automatic Hand-pushed
Weeder”. ABUAD Journal of Engineering Research and Development. (Afe Babalola Univ.,
Ado Ekiti), 5(1): 134 – 146. http://ajerd.abuad.edu.ng/wpcontent/uploads/2022/07/AJERD0501-12.pdf
14. Sobamowo, M. G., Ajayi, A. B., Oyekeye, M. O., Adeleye, O. A., (2022). “Thermal-Fluidic
Study of Drying Chamber of Photovoltaic-powered Forced Convection Solar Dryer using
Finite Element Method”. Computational Sciences and Engineering. (University of Guilan,
Iran). 2(2), 181 – 199. journals.guilan.ac.ir/article_5649.html.
https://doi.org/10.22124/CSE.2022.22338.1031
15. Sobamowo, G. B., Olagbadamosi, R. O., Ajayi, A. B., Sequeira, A. M. O. (2022). “Nonlinear
Thermal Response Analysis of an Internally Heated Radiative-Convective Porous Fin
subjected to Magnetic Fields using Method of Lines”. Journal of Engineering and Exact
Sciences. (Fed. Univ. of Viçosa, Brazil), 8(10): 14801-01i.
https://periodicos.ufv.br/jcec/article/view/14801
16. Sobamowo, G. B., Olagbadamosi, R. O., Ajayi, A. B., Sequeira, A. M. O. (2022). “Hybrid
Method for Predictive Transient Nonlinear Analysis of a Radiative-Convective Moving Porous
Fin with Temperature-variant Internal Heat Generation” Journal of Engineering and Exact
Sciences (Fed. Univ. of Viçosa, Brazil), 8(9): 15041-01i.
https://doi.org/10.18540/jcecvl8iss9pp14802-01i
17. Ajayi, A. B., Openibo, A. O., Sobamowo, G. M., & Siqueira, A. M. de O. (2022). “Dynamic
analysis of a translating five-bar linkage mechanism”. The Journal of Engineering and Exact
Sciences, 8(3): 15041–01i. (Fed. Univ. of Viçosa,
Brazil), https://doi.org/10.18540/jcecvl8iss3pp15041-01i
18. Ajayi, A. B., Popoola, A. F., Mustapha, H. A., Folarin, T. E., Afolabi, S. O. (2021).
“Development of a Rectangular Mold with Vertical Screw Press for Polyurethane (Foam)
Wastes Recycling Machine”. ABUAD Journal of Engineering Research and Development.
(Afe Babalola Univ., Ado Ekiti), 4(1): 38 – 48. http://ajerd.abuad.edu.ng/wpcontent/uploads/2021/07/AJERD0401-05.pdf
19. Ajayi, A. B., Folarin, T. E., Mustapha, H. A., Popoola, A. F., and Afolabi, O. S. (2021)
“Development of a Mixer for Polyurethane (Foam) Waste Recycling Machine”. ABUAD
Journal of Engineering Research and Development. (Afe Babalola Univ., Ado Ekiti), 4(1):
20 – 30. http://ajerd.abuad.edu.ng/wp-content/uploads/2021/07/AJERD0401-03.pdf
20. Ajayi, A. B., Afolabi, O. S., Folarin, T. E., Mustapha, H. A., and Popoola, A. F. (2020)
“Development of a Low-Cost Polyurethane (Foam) Waste Shredding Machine”. ABUAD
Journal of Engineering Research and Development. (Afe Babalola Univ., Ado Ekiti), 3(2):
pp 105-114. ajerd.abuad.edu.ng/wp-content/uploads/2020/12/AJERD0302-12.pdf
21. Ajayi, A. B., Osumune, J. I. (2013). “Design of Sawdust Briquette Machine”. Innovative
Systems Design and Engineering. 4(10): 51 – 58.
(https://www.iiste.org/Journals/index.php/ISDE/article/view/6686/6827)
22. Ajayi, A. B., Akerele, O. O., (2013). “Development of Hydrogen Generator for Hydrogen Gas
Production”. The International Journal of Engineering and Science. 2(7): pp. 126 – 130.
(theijes.com/papers/v2-i7/Part.6/Q027601260130.pdf)
23. Ajayi, A. B., Olasunkanmi, L. K., (2013). “Development of Groundnut Chaff Removing
Machine”. International Journal of Engineering Science Invention. 2(8): 45 – 51.
(www.ijesi.org/papers/Vol%202(8)/Version-1/H0281045051.pdf)
24. Ajayi, A. B. (2013) “Design and Development of Automatic Hedge Dressing Machine”
International Journal of Engineering Science Invention. 2(7): 111 – 116.
(www.ijesi.org/papers/Vol%202(7)/Version-4/Q027401110116.pdf)
25. Ajayi, A. B., Okafor, F. N., (2013) “Development of Improved Dual-Purpose Fitness Bike for
Electricity Generation” Journal of Energy Technologies and Policy. 3(7): 78 – 84.
(https://iiste.org/Journals/index.php/JETP/article/view/6874/6983)
26. Ajayi, A. B., Okafor, F. N. (2013). “Dynamics of Small Hydro-Power Station (SHS) Turbine
for Slow Moving Water Body” The International Journal of Engineering and Science. 2(7):
89 – 95. (www.theijes.com/papers/v2i7/Part.6/L0276089095.pdf)
27. Ajayi, A. B., Damisa, O., Ajiboye, J. S. (2013). “Kinematics of Lower Limb Segments during
Cycling Session” Innovative Systems Design and Engineering. 4(10): 59 – 70.
(https://www.iiste.org/Journals/index.php/ISDE/article/view/6687/6828)
28. Ajayi, A. B., Majekodunmi, O. A., Shittu, A. S., “Comparison of Power Output from Solar PV
Panels with reflectors and Solar Trackers” Journal of Energy Technologies and Policy. 3(7):
70 – 77. (https://iiste.org/Journals/index.php/JETP/article/view/6874/6983)
29. V. O. S. Olunloyo, Ayo Oyediran, C. A. Osheku, Ajayi Adewale, A. B. Ajayi. (2012).
“Dynamics and Stability of Vertical Pipelines Conveying Fluids”. Journal of Engineering
Research, (Univer. of Lagos), 7(4): 83 – 105.
30. Ajayi, A. B., Ayorinde, O. I., Openibo, A. O. (2024). Development of hybrid renewable energy
powered Laboratory-Scale plastic bottle wastes converter. ACTA TECHNICA
CORVINIENSIS – Bulletin of Engineering, (International Journal of Engineering. Faculty of
Engineering, Univ. Politehnica Timisoara, Hunedoara, ROMANIA). (Accepted for
Publication)
31. Ajayi, A. B, A. O. Abass, and J. S. Ajiboye. (2015). “Biomechanics of Lower Limb Segments
During Cycling Session” 1st International Conference on Bioscience Research, AWKA,
Nigeria. 25 – 27 May, 2015.
32. Ajayi, A. B. J. S. Ajiboye, and A. O. Abass. (2015). “Effects of Seat Height on the
Biomechanics of Lower Limb Segments During Cycling Session” 1st International Conference
on Bioscience Research, AWKA, Nigeria. 25 – 27 May, 2015.
33. Olakoyejo, O. T., Obayopo, S. O., Ajayi, A. B., Martins, L., and Meyer, J. P., (2015)
“Numerical Optimization of Hexagonal Cooling Channels with Internal Heat Generation
Using
AL2O3-Water Nanofluid”. 11th International Conference on Heat Transfer, Fluid Mechanics
and Thermodynamics (HEFAT 2015), Kruger Park, South Africa. 20 – 23 July, 2015.
(https://repository.up.ac.za/handle/2263/55865)
34. Olakoyejo, O. T., Ajayi, A. B., Obayopo, S. O., Martins, L., and Meyer, J. P., (2014)
“Numerical Optimization of Forced Convention in a Vascularized Solid Channels”. 10th
International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT’
2014), Orlando, Florida. 2014, 1641 – 1648. (https://repository.up.ac.za/handle/2263/44526)
35. Ajayi, A. B., (2008) “Current Trends in Vehicles Inspection System” in the Proceedings of
International Conference on Road Safety in Africa, Abuja, Nigeria. Feb 18 – 19, 2008, 207 –
212.
36. Ajayi, A. B., and O. O. Dosunmu (2002). “Environmental hazards of importing used vehicles
into Nigeria” in the Proceedings of International Symposium on Environmental Pollutions
Control and Waste Management (EPCOWM ’2002) Tunis, Tunisia. January 2002. 1: 521 –
532.
37. O. O. Dosunmu, and Ajayi, A. B., (2002). “Problems and management of sawmill waste in
Lagos” in the Proceedings of International Symposium on Environmental Pollutions Control
and Waste Management (EPCOWM ’2002) Tunis, Tunisia. January 2002. 1: 271 – 278.