Academic Publications of Dr. Enesi Y. Salawu

Dr. Enesi Y. Salawu

COLLEGE OF ENGINEERING , WIGWE UNIVERSITY

Academic Publications of Dr. Enesi Y. Salawu
  1. Obanor, E., Dirisu, J., KILANKO, O., Salawu, E., & Ajayi, O. (2024) PROGRESS IN GREEN HYDROGEN ADOPTION IN THE AFRICAN CONTEXT. Frontiers in Energy Research, 12, 1429118.

 

  1. Ongbali, S. O., Omotehinse, S. A., Adams, C. O., Salawu, E. Y., & Afolalu, S. A. (2024). Analysis of the key factors for small and medium-sized enterprises growth using principal component analysis. Heliyon, 10(13).

 

  1. Edun, B. M., Agbetoye, L. A. S., Ajayi, O. O., & Salawu, E. Y. (2024). Design and Performance Evaluation of a Cassava Harvester Lifting Unit. Engineering Headway, 2, 57-68.
  2. Emuowhochere, O. T., Salawu, E. Y., Ongbali, S. O., & Ajayi, O. O. (2024). Future of Artificial Intelligence in Developing a Sustainable Intelligent Engineering Systems: A Review. Engineering Headway, 2, 111-125.

 

 

  1. Banjo, S. O., Bolaji, B. O., Oyelaran, O. A., Babalola, P. O., Afolalu, A. S., Salawu, E. Y., & Emetere, M. E. (2024). Performance assessment of a refrigeration system with an integrated condenser under different environmental conditions. Heliyon, 10(7).

 

 

  1. Dirisu, J., Salawu, E. Y., Ekpe, C. I., Udoye, E. N., Falodun, E. O., Oyedepo, S. O., … & Kale, S. A. (2023). Promoting the use of bioenergy in developing nations: A CDM route to sustainable development. Frontiers in Sustainable Energy Policy, 2, 1184348.

 

  1. Salawu, E. Y., Thankgod, E. O., Afolalu, S. A., Shittu, K. A., Kayode, J. F., Ajayi, O. O., & Lawal, S. L. (2023). DEVELOPMENT OF AN ANN-BASED DEFECT DETECTION SYSTEM FOR PROCESS QUALITY OPTIMIZATION IN BOTTLING INDUSTRY. Journal of Southwest Jiaotong University, 58(4).

 

  1. Salawu, E. Y., Shittu, K. A., Afolalu, S. A., Kayode, J. F., Lawal, S. L., Ajayi, O. O., & Ongbali, S. O. (2023). Microstructural evaluations of mild steel and HT250 grey cast iron in ethanol environment. Nigerian Journal of Technological Development, 20(3), 113-123.

 

  1. Mosunmola, E., Ajayi, O. O., Babalola, P. O., & Salawu, E. Y. (2023). Effect of case hardening on the wear and hardness properties of medium carbon steel for bone crushing. Heliyon.

 

  1. Salawu, E. Y., Adediran, A. A., Ajayi, O. O., Inegbenebor, A. O., & Dirisu, J. O. (2022). On the analyses of carbon atom diffused into grey cast iron during carburisation process. Scientific Reports, 12(1), 1-12.

 

  1. Ogbonnaya, M., Ajayi, O. O., Waheed, M. A., & Salawu, E. Y. (2022). Thermophysical Properties and Heat Transfer Characteristics of Nanorefrigerants: Some Existing Results and Areas for Further Researches. In Key Engineering Materials (Vol. 917, pp. 207-227). Trans Tech Publications Ltd.

 

  1. Salawu, E. Y., Ajayi, O. O., Okeniyi, J. O., Inegbenebor, A. O., Afolalu, S., Ongbali, S., & Banjo, S. (2021). On the prediction of power loss in helical gearbox via simulation approach. Cleaner Engineering and Technology, 3, 100128.

 

  1. Dirisu, J. O., Oyedepo, S., Fayomi, O., Salawu, E., Oyekunle, J., Asere, A., & Efemwenkiekie, K. (2021). Surface Chemistry Studies of Emission and Thermal Behaviour of Developed Composites for Building Ceiling Materials. Silicon

 

  1. Ongbali, S. O., Afolalu, S. A., Oyedepo, S. O., Inegbenebor, A. O., & Salawu, E. Y. (2021). The Role of Physical Distributionin Supply Chain Enterprise and the Accompanying Bottleneck Problems: A Review. Turkish Journal of Computer and Mathematics Education, 12(13), 3312-3318.

 

  1. Salawu, E. Y., Ajayi, O. O., Inegbenebor, A., Fayomi, O. S. I., Popoola, A. P. I., & Uyor, U. O. (2020). Corrosion Behavior of Mild Steel in Different Concentrations of Ethanol Beverages. Journal of Bio-and Tribo-Corrosion, 6(1), 1-12.

 

  1. Salawu, E. Y., Ajayi, O. O., Inegbenebor, A. O., Akinlabi, S., Popoola, A. P. I., Akinlabi, E., … & Uyo, U. O. (2020). Electrochemical study and gravimetric behaviour of gray cast iron in varying concentrations of blends as alternative material for gears in ethanol environment. Journal of Materials Research and Technology, 9(4), 7529-7539.

 

  1. Salawu, E. Y., Inegbenebor, A. O., Ajayi, O. O., Akinlabi, S. A., & Akinlabi, E. T. (2020). Fractal Wear Behaviour of Gear Tooth: A Review. Advances in Manufacturing Engineering, 47-54.

 

  1. Salawu, E. Y., Ajayi, O. O., Inegbenebor, A. O., Akinlabi, S., Akinlabi, E., Popoola, A. P. I., & Uyo, U. O. (2020). Investigation of the effects of selected bio-based carburising agents on mechanical and microstructural characteristics of gray cast iron. Heliyon, 6(2), e03418.

 

  1. Salawu, E. Y., Ajayi, O. O., Muyiwa, F., Ishola, F., & Joseph, A. (2020). Structural Fabrication and Dynamic Simulation of Stress of a Vibrosieve for Efficient Industrial Applications. In Advances in Manufacturing Engineering (pp. 715-724). Springer, Singapore.

 

  1. Ishola, F., Mamudu, A. O., Adelekan, D., Elehinafe, F., Iyala, F., & Enesi, S. Y. (2020). Production of biodiesel from palm olein with the aid of methanol and potassium hydroxide catalyst. International Journal of Advanced Science and Technology, 29(5), 1076-1084.

 

  1. Ongbali Samson, A. Afolalu Sunday, & Y. Salawu Enesi (2020) Factorial Study of Youth Unemployment Problem Using Principal Component Analysis. Journal of Advanced Research in Dynamical & Control Systems, Vol. 12, 07-Special Issue

 

  1. Oyetunji, O. R., Sijuade, T. T., Olatubara, V. I., Salawu, E. Y., Olutimo, E. Z., & Ishola, F. A. (2020). Design, 3D Printing and Automation of a Model Light Duty Drilling Machine. Technology, 11(7), 437-448.

 

  1. Oyetunji, O. R., Adesope, W. A., Ufokima, P., Salawu, E. Y., Araoyinbo, A. O., & Ishola, F. A. (2020). Design and Fabrication of a Pilot Scale Remote Controlled Electric Car Using Additive Manufacturing Approach. International Journal, 8(7).

 

  1. Salawu, E. Y., Ajayi, O. O., Inegbenebor, A., Akinlabi, S., & Akinlabi, E. (2019). Influence of pulverized palm kernel and egg shell additives on the hardness, coefficient of friction and microstructure of grey cast iron material for advance applications. Results in Engineering, 3, 100025.

 

  1. Salawu, E., Joseph, A., Muyiwa, F., Dirisu, J., O O, A., & Ishola, F. (2019). Design of a Beverage Can Crusher: A Lean Thinking Solution for Environmental Sustainability in Food and Beverage Industries. International Journal of Civil Engineering and Technology, 10(3).

 

  1. Salawu, E. Y., Ajayi, O. O., Inegbenebor, A. O., & Akinlabi, S. A. (2019). Micro-Structural and Mechanical Characterization of Pulverized Wood Charcoal and Egg-Shell as Organic Carbon Additives for Grey Cast Iron Carburization. International Journal of Mechanical and Production Engineering Research and Development, 9(6), 391-398.

 

  1. Salawu, E. Y., Ajayi, O. O., Inegbenebor, A. O., Akinlabi, S. A., Akinlabi, E. T., & Ishola, F. (2019). Influence of von mises stress on the deformation behaviour of a pinion spur gear under cyclic loading in a bottling machine: an approach for predicting surface fatigue failure in gears. International Journal of Engineering Research and Technology, 12(12), 2207-2211.

 

  1. Salawu, E. Y., Ajayi, O. O., & Inegbenebor, A. O. (2019). Turbulence flow simulation of molten metals in runners for defect control in casting of a spur gear blank. International Journal of Mechanical Engineering and Technology, 10(1), 1921-1933.

 

  1. Azeta, J., Salawu, E. Y., Fajobi, M. A., Ajayi, O. O., Dirisu, J. F., Onwardi, P. N., & Aworinde, A. K. (2019). Technical Innovations for Developing Countries: The Case of a Human‐Powered Fruit Blender. International Journal of Mechanical Engineering and Technology, 10(3), 673-679.

 

  1. Ongbali Samson, O., Afolalu Sunday, A., & Salawu Enesi, Y. (2019). Bottleneck problems arising in inter-industry production setting and vertical integration: a review. Technology, 10(5), 606-612.

 

  1. Enesi Y. Salawu, Oluseyi O.Ajayi, Anthony Inegbenebor, A Afolalu & Ongbali Samson (2018). Pareto Analysis of Product Quality and Cost Effects in Bottling Machines- A LEAN Thinking Approach for Alcohol Industry. International Journal of Mechanical Engineering and Technology Volume 9, Issue 11.

 

  1. Sunday, A., Enesi, S., Kehinde, O., Samuel, A., Ikechi, I., & Remilekun, E. (2018). Failure mode and effect analysis a tool for reliability evaluation. European Journal of Engineering Research and Science, 3(4), 65-68.

 

 

  1. Yekini, S. E., Okokpujie, I. P., Afolalu, S. A., Ajayi, O. O., & Azeta, J. (2018). Investigation of production output for improvement. International Journal of Mechanical and Production Engineering Research and Development, 8(1), 915-922.

 

  1. Okokpujie, I. P., Ajayi, O. O., Afolalu, S. A., Abioye, A. A., Salawu, E. Y., & Udo, M. (2018). Modeling and optimization of surface roughness in end milling of aluminium using least square approximation method and response surface methodology. International Journal of Mechanical Engineering and Technology (IJMET), 9(1), 587-600.

 

  1. Afolalu, S. A., Asonaminasom, E. H., Ongbali, S. O., Abioye, A. A., Udo, M. O., & Salawu, E. Y. (2018). Dataset on experimental investigation of optimum carburizing temperature and holding time of bi-nano additives treatment of AISI 5130 steel. Data in brief, 19, 2279-2283.

 

  1. Okwuobi, S., Ishola, F., Ajayi, O., Salawu, E., Aworinde, A., Olatunji, O., & Akinlabi, S. A. (2018). A reliability-centered maintenance study for an individual section-forming machine. Machines, 6(4), 50.

 

  1. Azeta, J., Okokpujie, I. P., Okokpujie, K. O., & Salawu, E. Y. (2018). Analytical Study of a Road Traffic Conflict at the T-Junction of University of Benin Main Gate. International Journal of Civil Engineering and Technology (IJCIET), 9(8), 1048-1061.

 

  1. Okokpujie, I. P., Salawu, E. Y., Nwoke, O. N., Okonkwo, U. C., Ohijeagbon, I. O., & Okokpujie, K. O. (2018). Effects of process parameters on vibration frequency in turning operations of perspex material. Proceedings of the World Congress on Engineering 2018 Vol II WCE 2018, July 4-6, 2018, London, U.K.

 

  1. Okokpujie, I. P., Okokpujie, K. O., Salawu, E. Y., & Ismail, A. O. (2017). Design, production and testing of a single stage centrifugal pump. International Journal of Applied Engineering Research, 12(18), 7426-7434.

 

  1. Afolalu, S. A., Salawu, E. Y., Okokpujie, I. P., Abioye, A. A., Abioye, O. P., Udo, M., … & Ikumapayi, O. M. (2017). Experimental analysis of the wear properties of carburized HSS (ASTM A600) cutting tool. International Journal of Applied Engineering Research, 12(19), 8995-9003.

 

  1. Orisanmi, B. O., Afolalu, S. A., Adetunji, O. R., Salawu, E. Y., Okokpujie, I. P., Abioye, A. A., … & Abioye, O. P. (2017). Cost of corrosion of metallic products in Federal University of Agriculture, Abeokuta. International Journal of Applied Engineering, 12(24), 14141-14147.

 

  1. Okokpujie, I. P., Ikumapayi, O. M., Okonkwo, U. C., Salawu, E. Y., Afolalu, S. A., Dirisu, J. O., … & Ajayi, O. O. (2017). Experimental and mathematical modeling for prediction of tool wear on the machining of aluminium 6061 alloy by high speed steel tools. Open Engineering, 7(1), 461-469.

 

  1. Salawu, E. Y., Ajayi, O. O., & Olatunji, O. O. (2015). Theoretical modelling of thermal-hoop stress around the tooth of a spur gear in a filler machine. Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2(2), 1635-1640.

 

CONFERENCE PUBLICATIONS

  1. Ademuyiwa, F., Afolalu, S. A., Monye, S. I., Salawu, E., Lawal, S. L., & Ongbali, S. O. (2024, April). Impact of Materials and Wear Mechanisms in a Brake System. In 2024 International Conference on Science, Engineering and Business for Driving Sustainable Development Goals (SEB4SDG) (pp. 1-8). IEEE.

 

  1. Awoyemi, O. O., Azeta, J., Babalola, P. O., Salawu, E. Y., Akerekan, O. E., & Airewa, I. (2024, April). Condition Monitoring of Spur Gears in Bottling Machines: A Review. In 2024 International Conference on Science, Engineering and Business for Driving Sustainable Development Goals (SEB4SDG) (pp. 1-11). IEEE.

 

  1. Akerekan, O. E., Okeniyi, J. O., Salawu, E. Y., Awoyemi, O. O., & Airewa, I. (2024, April). Review of Aluminium Beverage Can Production and its Associated Problems. In 2024 International Conference on Science, Engineering and Business for Driving Sustainable Development Goals (SEB4SDG) (pp. 1-5). IEEE.

 

 

  1. Ademuyiwa, F., Afolalu, S. A., Monye, S. I., Salawu, E., Lawal, S. L., & Ongbali, S. O. (2024, April). Friction and Wear Characteristics of Nanostructured Coatings in Tribological Systems. In 2024 International Conference on Science, Engineering and Business for Driving Sustainable Development Goals (SEB4SDG) (pp. 1-10). IEEE.

 

  1. Ademuyiwa, F., Afolalu, S. A., Monye, S. I., Salawu, E., Lawal, S. L., & Ongbali, S. O. (2024, April). Lubrication Challenges in Micro-Electro-Mechanical Systems (Mems). In 2024 International Conference on Science, Engineering and Business for Driving Sustainable Development Goals (SEB4SDG) (pp. 1-10). IEEE.
  3. Salawu, E. Y., Success-Omachi, V. O., Awoyemi, O. O., Akerekan, O. E., Ongbali, S. O., & Airewa, I. (2024, April). Gear Failures and Probable Solutions-A Short Review. In 2024 International Conference on Science, Engineering and Business for Driving Sustainable Development Goals (SEB4SDG) (pp. 1-4). IEEE.

 

  1. Ozuor, O., Ighravwe, D. E., Aikhuele, D. O., Fayomi, O. S., & Salawu, E. Y. (2024, April). Multi-Objective Multi-Integer Maintenance Planning Optimization Model of Industrial Conveyor Belt. In 2024 International Conference on Science, Engineering and Business for Driving Sustainable Development Goals (SEB4SDG) (pp. 1-8). IEEE.
  3. Salawu, E. Y., Chinaecherem, O. N., Ajayi, O. O., & Ongbali, S. O. (2023). Design analysis and fabrication of a 24-teeth spur gear from HT250 gray cast iron. Materials Today: Proceedings.

 

 

  1. Salawu, E. Y., Elvis, A. O., Ajayi, O. O., Ongbali, S. O., & Afolalu, S. A. (2023). Particle size distribution analysis of carburized HT250 gray cast iron using ImageJ. Materials Today: Proceedings.

 

  1. Salawu, E. Y., Awoyemi, O. O., Akerekan, O. E., Afolalu, S. A., Kayode, J. F., Ongbali, S. O., … & Edun, B. M. (2023). Impact of Maintenance on Machine Reliability: A Review. In E3S Web of Conferences (Vol. 430, p. 01226). EDP Sciences.

 

 

  1. Salawu, E. Y., Akerekan, O. E., Afolalu, S. A., Kayode, J. F., Ongbali, S. O., Edun, B. M., … & Awoyemi, O. O. (2023). Condition monitoring and reliability assessment, an essential tool for Boiler Plant Maintenance-A review. In E3S Web of Conferences (Vol. 430, p. 01228). EDP Sciences.

 

  1. Salawu, E. Y., Akerekan, O. E., Afolalu, S. A., Kayode, J. F., Ongbali, S. O., Edun, B. M., … & Awoyemi, O. O. (2023). Condition monitoring and reliability assessment, an essential tool for Boiler Plant Maintenance-A review. In E3S Web of Conferences (Vol. 430, p. 01228). EDP Sciences.
  2. Ehi-Okoebor, C., Salawu, E. Y., Afolalu, S. A., Ajayi, O. O., Kayode, J. F., & Lawal, S. L. (2023, April). Importance of hybrid organic carburizers on the Mechanical properties of mild steel: A Review. In 2023 International Conference on Science, Engineering and Business for Sustainable Development Goals (SEB-SDG) (Vol. 1, pp. 1-12). IEEE.

 

  1. Noiki, A. A., Salawu, E. Y., Afolalu, S. A., Kayode, F. J., & Lawal, S. L. (2023, April). Leveraging Modelling and Simulation to address Manufacturing Challenges. In 2023 International Conference on Science, Engineering and Business for Sustainable Development Goals (SEB-SDG) (Vol. 1, pp. 1-9). IEEE.

 

 

  1. Noiki, A. A., Salawu, E. Y., Afolalu, S. A., Kayode, J. F., & Lawal, S. L. (2023, April). Green Supply Chain Management: Impacts, Challenges, Opportunities, and Future Perspectives. In 2023 International Conference on Science, Engineering and Business for Sustainable Development Goals (SEB-SDG) (Vol. 1, pp. 1-10). IEEE.

 

  1. Ongbali, S. O., Koleola, F. F., Afolalu, S. A., Oladipupo, S., Shomefun, T. E., & Salawu, E. Y. (2023, April). A Review of the Mechanical and Physical Properties of Gear Manufactured by Powder Metallurgy Technique. In 2023 International Conference on Science, Engineering and Business for Sustainable Development Goals (SEB-SDG) (Vol. 1, pp. 01-05). IEEE.

 

 

  1. Ongbali, S. O., Afolalu, S. A., Salawu, E. Y., & Omotehinse, S. A. (2023, April). Review of Project Monitoring and Evaluation Technique as Index for Sustainable Manufacturing Performance. In 2023 International Conference on Science, Engineering and Business for Sustainable Development Goals (SEB-SDG) (Vol. 1, pp. 1-5). IEEE.

 

 

  1. Salawu, E. Y., Ajayi, O. O., Inegbenebor, A. O., Akinlabi, S., Afolalu, S. A., & Edun, B. M. (2021, April). Dynamic Simulation of Gear System Based on 2D Space Multibody Physics: A Sustainable Gear Design Approach. In IOP Conference Series: Materials Science and Engineering (Vol. 1107, No. 1, p. 012195). IOP Publishing.

 

  1. Salawu, E. Y., Ajayi, O. O., Inegbenebor, A. O., Akinlabi, S., Afolalu, S. A., & Aroyinbo, A. (2021, April). Material Selection and Processing Techniques: Crucial Factors for Gear Engineering. In IOP Conference Series: Materials Science and Engineering (Vol. 1107, No. 1, p. 012114). IOP Publishing.

 

  1. Edun, B. M., Ajayi, O. O., Babalola, P. O., & Salawu, E. Y. (2021, April). Effect of Heat Treatment Methods on the Fatigue Behaviour of Hammermill: A Review. In IOP Conference Series: Materials Science and Engineering (Vol. 1107, No. 1, p. 012212). IOP Publishing.

 

  1. Afolalu, S. A., Salawu, E. Y., Joseph, O. O., Oladipupo, S., Emetere, M. E., Ongbali, S. O., … & Akinlabi, S. A. (2021, April). Overview Impacts of Heat Treatment Techniques on Grain Structures of a Steel. In IOP Conference Series: Materials Science and Engineering (Vol. 1107, No. 1, p. 012137). IOP Publishing.

 

  1. Afolalu, S. A., Salawu, E. Y., Ogedengbe, T. S., Joseph, O. O., Okwilagwe, O., Emetere, M. E., … & Akinlabi, S. A. (2021, April). Bio-Agro Waste Valorization and its Sustainability in the Industry: A Review. In IOP Conference Series: Materials Science and Engineering (Vol. 1107, No. 1, p. 012140). IOP Publishing.

 

  1. Fajobi, M. A., Salawu, E. Y., Azeta, J., Dirisu, J. O., Ajayi, O. O., & Onwordi, P. (2020). Development of a Human Powered Pedal Washing machine. In IOP Conference Series: Materials Science and Engineering (Vol. 811, No. 1, p. 012035). IOP Publishing.

 

  1. Salawu, E. Y., Ajayi, O. O., Inegbenebor, A. O., & Afolalu, S. A. (2019). Constitutive model to analyse the effect of variation in temperature distribution on the rate of heat transfer around a spur gear tooth. Procedia Manufacturing, 35, 236-241.

 

  1. Salawu, E. Y., Ajayi, O. O., & Inegbenebor, A. O. (2019). Forensic Investigation of a Failed Intermediate Starwheel Spur Gear Tooth in a Filler Machine. Procedia Manufacturing, 35, 97-102.

 

  1. Afolalu, S. A., Ongbali, S. O., Abioye, A. A., Oladipupo, S., Ajayi, O. O., & Salawu, E. Y. (2019). Modelling and simulation of mechanical wear of carburized cutting tool. Procedia Manufacturing, 35, 1067-1072.

 

  1. Salawu, E. Y., Ajayi, O. O., & Inegbenebor, A. O. (2019). Predictive Modelling of a K-Unit Botttling Plants for Reliability Improvement. Procedia Manufacturing, 35, 91-96.

 

  1. Salawu, E. Y., Oghenevwegba, E., Ajayi, O. O., Inegbenebor, A. O., Akinlabi, E. T., & Akinlabi, S. T. (2019). Effect of Multi-gating System on Solidification of Molten Metals in Spur Gear Casting: A Simulation Approach. In TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings (pp. 667-677). Springer, Cham.

 

  1. Salawu, E. Y., Ajayi, O. O., Inegbenebor, A., Popoola, A. P. I., & Uyor, U. O. (2019, December). Effects of Heat Treatment Techniques on the Fatigue Behaviour of Steel Gears: A Review. In Journal of Physics: Conference Series (Vol. 1378, No. 4, p. 042001). IOP Publishing.

 

  1. Ajayi, O. O., Okolo, T. I., Salawu, E. Y., Owoeye, F. T., Akinlabu, D. K., Akinlabi, E. T., … & Afolalu, S. A. (2019). Performance and Energy Consumption Analyses of R290/Bio-Based Nanolubricant as a Replacement for R22 Refrigerant in Air-Conditioning System. In Energy technology 2019 (pp. 103-112). Springer, Cham.

 

  1. Ajayi, O. O., Agarana, M. C., Akinwumi, I. I., Okokpujie, P. I., Salawu, E. Y., Abioye, A. A., … & Leramo, R. O. (2019). Modelling rate of traffic-induced building vibrations in Sango-Ota, Nigeria: an assumption based analysis. WIT Trans Built Environ, 182, 303-313.

 

  1. Joseph, D. O., Enesi, S. Y., Joseph, A., Muyiwa, F. A., Imhade, O. P., & Oluseyi, A. O. (2019, July). Development of a time-saving precision plantain cutter. In AIP Conference Proceedings (Vol. 2123, No. 1, p. 020040). AIP Publishing LLC.

 

  1. Afolalu, S. A., Efekodha, G. E., Ongbali, S. O., Abioye, A. A., Salawu, E. Y., Ajayi, O. O., & Oluwabunmi, A. P. (2019). Experimental analysis of the effect of tri-nano additives on wear rate of mild steel during machining. Procedia Manufacturing, 35, 395-400.

 

  1. Azeta, J., Ishola, F., Akinpelu, T., Bolu, C., Dirisu, J., Fajobi, M. A., & Salawu, E. Y. (2019). An Experimental Evaluation of LTA on the performance of a drone. Procedia Manufacturing, 35, 1135-1140.

 

  1. Ajayi, O. O., Aba-Onukaogu, C. C., Salawu, E. Y., Owoeye, F. T., Akinlabu, D. K., Popoola, A. P. I., … & Abioye, A. A. (2019). Effect of Biomaterial (Citrullus Lanatus Peels) Nanolubricant on the Thermal Performance and Energy Consumption of R600a in Refrigeration System. In Energy technology 2019 (pp. 91-102). Springer, Cham.

 

  1. Ajayi, O. O., Ukasoanya, D. E., Ogbonnaya, M., Salawu, E. Y., Okokpujie, I. P., Akinlabi, S. A., … & Owoeye, F. T. (2019). Investigation of the effect of R134a/Al2O3–nanofluid on the performance of a domestic vapour compression refrigeration system. Procedia Manufacturing, 35, 112-117.

 

  1. Salawu, E. Y., Okokpujie, I. P., Ajayi, O. O., Afolalu, S. A., & Agarana, M. C. (2018). Numerical modeling and evaluation of involute curve length of a spur gear tooth to maintain constant velocity ratio while in motion. Proceedings of the International MultiConference of Engineers and Computer Scientists Vol II IMECS, Hong Kong

 

  1. Salawu, E. Y., Okokpujie, I. P., Ajayi, O. O., & Agarana, M. C. (2018). Analytical technique for the determination of hoop stress and radial stress on the tooth spur gear under vertical loading in a food packaging machine. Proceedings of the International MultiConference of Engineers and Computer Scientists 2018 Vol II

 

  1. Enesi Yekini Salawu, Oyenike Oluyemi Fayomi, Ojo Sunday Fayomi, David Omole (2018). On the Applied Research Concept Towards Becoming a Winning University. Proceedings of the International Conference on Industrial Engineering and Operations Management. Pretoria / Johannesburg, South Africa

 

  1. Ajayi, O. O., Useh, O. O., Banjo, S. O., Oweoye, F. T., Attabo, A., Ogbonnaya, M., … & Salawu, E. Y. (2018, July). Investigation of the heat transfer effect of Ni/R134a nanorefrigerant in a mobile hybrid powered vapour compression refrigerator. In IOP Conference Series: Materials Science and Engineering (Vol. 391, No. 1, p. 012001). IOP Publishing.

 

  1. Anthony, I., Okolie, S. T., Udoye, N. E., Enesi, S. Y., & Onyisi, O. (2018, September). Nigeria Vision 20: 2020; Review of Current Status Using Re Development and Gross Domestic. In IOP Conference Series: Materials Science and Engineering (Vol. 413, No. 1, p. 012049). IOP Publishing.

 

  1. Fayomi, O. S. I., Ayoola, A. A., E.Salawu & O .Atiba (2018). Structural Characterization and Corrosion Performance of Super Hard Composite Coating: An Overview. Proceedings of the International Conference on Industrial Engineering and Operations Management
    Pretoria / Johannesburg, South Africa

 

  1. Afolalu, S. A., Okokpujie, I. P., Salawu, E. Y., Abioye, A. A., Abioye, O. P., & Ikumapayi, O. M. (2018, April). Study of the performances of nano-case treatment cutting tools on carbon steel work material during turning operation. In AIP conference proceedings (Vol. 1957, No. 1, p. 050001). AIP Publishing LLC

 

  1. Afolalu, S. A., Abioye, O. P., Salawu, E. Y., Okokpujie, I. P., Abioye, A. A., Omotosho, O. A., & Ajayi, O. O. (2018, April). Impact of heat treatment on HSS cutting tool (ASTM A600) and its behaviour during machining of mild steel (ASTM A36). In AIP conference proceedings (Vol. 1957, No. 1, p. 050003). AIP Publishing LLC.

LINKS TO MY PUBLICATIONS

SCOPUS: https://www.scopus.com/results/authorNamesList.uri?st1=salawu&st2=Enesi+Yekini&origin=searchauthorlookup

GOOGLE SCOLAR: https://scholar.google.com/citations?user=zxgIeBcAAAAJ&hl=en